Features & Benefits of Accudose Dispensers or Proportioners
Better chemical performance, Consistently correct dilution ensures products perform
Labor savings, Employee time required to prepare solutions is greatly reduced.
Improved employee safety, Exposure to potential eye and skin irritants is reduced by eliminating splashing and spilling when chemicals are poured.
Environmentally friendly, Concentrating chemicals allows enormous reduction in packaging, minimizing additions to the solid waste stream
Hydro's E-Gap eductors, which provide backflow protection through use of an elastomeric sleeve. (ASSE 1055B Approved)
Hydro's patented Air Gap eductors, which use a one inch gap of air between the water source and the chemical inlet to provide backflow protection. (ASSE 1055B Approved.)
Economical, linkable systems to meet customers’ needs
AccuDose dispensers or proportioners use durable materials and state of the art water valve technology to provide low costs, consistent performance, and reliable service in a wide variety of customer environments. Users will also appreciate the ease of operation and low service requirements of the AccuDose line. Standard models are available with any combination of low and high flows in one, two and three product configurations. In addition, the linkable inlet and outlet fittings on AccuDose dispensers allow for more than three products to be dispensed – a larger dispensing system is created by simply joining the appropriate units together. And even after installation of the system, it can be expanded as new product needs arise. This versatility reduces stocking requirements while it increases the distributor's ability to respond to customer needs. And since each standard button can be converted to lockability in the field, customizing the standard systems to individual needs is simpler than ever!
Accudose 1 Product Dispenser
One product dispensers at 1 GPM or 3.5 GPM Water Flow into Container
To Purchase The 1 Chemical Accudose with Many Different Dilution Ratio Proportioner Click Here
Model # 1 GPM Water Flow 3.5 GPM Flow Dilution: Max. Min.
3830AG-2 Air Gap 1 128:1 3:1
38301 E-Gap 1 128:1 3:1
3833AG-2 Air Gap 1 350:1 3.5:1
38331 E-Gap 1 350:1 3.5:1
Accudose 2 Product Dispenser
Two product dispensers at 1 GPM or 3.5 GPM Water Flow into Container
To Purchase The 2 Chemical Accudose with Many Different Dilution Ratio Proportioner Click Here
Model # 1 GPM Water Flow 3.5 GPM Flow Dilution: Max. Min.
3841AG-2 Air Gap 2 128:1 3:1
38411 E-Gap 2 128:1 3:1
3844AG-2 Air Gap 2 350:1 3.5:1
38441 E-Gap 2 350:1 3.5:1
3846AG-2 Air Gap 1 1 one at each dilution above
38461 E-Gap 1 1 one at each dilution above
Accudose 3 Product Dispenser
Three product dispensers at 1 GPM or 3.5 GPM Water Flow into Container
To Purchase The 3Chemical Accudose with Many Different Dilution Ratio Proportioner Click Here
Model # 1 GPM Water Flow 3.5 GPM Water Flow Dilution: Max. Min.
3850AG-2 Air Gap 3 128:1 3:1
38501 E-Gap 3 128:1 3:1
3853AG-2 Air Gap 3 350:1 3.5:1
38531 E-Gap 3 350:1 3.5:1
3856AG-2 Air Gap 1 2 check dilution above
38561 E-Gap 1 2 check dilution above
3858AG-2 Air Gap 2 1 check dilution above
38581 E-Gap 2 1 check dilution above
Accudose Select Dispenser
AccuDose dispensers use durable materials and state of the art water valve technology to provide low costs, consistent performance, and reliable service in a wide variety of customer environments. Because the Select Series systems use fewer components to allow dispensing of many products, they offer a very low cost-per-product dispensed. The small system size makes it fit well even in a janitor's closet. Users will also appreciate the ease of operation and low service requirements of the AccuDose line. Users simply turn a knob to select the product or dilution desired, then push the button to dispense ready-to-use solution. And since each standard button can be converted to lockability in the field, customizing the standard systems to individual needs is simpler than ever! Accudose Select systems are available in three formats:
Single Product up to 4 dilutions Click HereModel #
1 GPM Water Flow 3.5 GPM Water Flow Dilution: Max. Min.3871AG-2 Air Gap 1 350:1 3.5:1
38711 E-Gap 1 350:1 3.5:13872AG-2 Air Gap
1 128:1 3:138721 E-Gap 1 128:1 3:1
To Purchase Select Four - Four Products Multiple Dilutions Click Here
3874AG-2 Air Gap 1 350:1 3.5:1 38741 E-Gap 1 350:1 3.5:13875AG-2 Air Gap
1 128:1 3:138751 E-Gap 1 128:1 3:1
Accudose Select 4 Plus Dispenser or Select 5
To Purchase Select
Five - Four Products 1GPM Rate Multiple Dilutions 1 Product 3.5GPM
Click Here
Model 3876 is designed for building service and housekeeping applications
and provides four products dispensed at low flow through a selector – great
for filling spray bottles – plus a single product dispensed at high flow –
perfect for floor care mop buckets. Model #
3876AG-2 Air Gap 4 Dilution 128:1 3:1 1 Dilution 350:1 3.5:1
38761 E-Gap 4 Dilution 128:1 3:1 1 Dilution 350:1 3.5:1HydroSprayers, HydroFoamers, Hydro Sanitation Foamer and Sprayers
Phone 1-800-916-5027